1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Astro A40 TR always on pc mode when i turn on mu ps4

Discussion in 'Community Support' started by rllanomiche, Jun 7, 2018.

  1. rllanomiche

    rllanomiche ASTRO Private

    Hello does somebody know if theres is a way that the mixamp always stays on ps4 mode. its kind of annoying having to always press the button to ps4 mode . thank you .
  2. One_Liter

    One_Liter ASTRO Specialist

    If it's the Mixamp Pro TR you should be able to change the "Start Up" mode via the ACC. Can't remember on exactly what tab it's located under but I know there's an option for it.
  3. ASTRO Vertigo

    ASTRO Vertigo Social Media Team Staff Member

    It's located under the Start Up tab :D

    @rllanomiche - as One_Liter has suggested. You can change the startup mode through the ASTRO Command Center on your PC. By default, it is set to Console Mode, so you may have changed this by mistake when updating settings on your MixAmp.

    - Mitch
  4. rllanomiche

    rllanomiche ASTRO Private

    thank you very much ! problem solved !
  5. ASTRO Vertigo

    ASTRO Vertigo Social Media Team Staff Member

    Glad to hear, rllanomiche.

    Please let us know if you have any other questions you're unsure about.

    - Mitch
  6. rllanomiche

    rllanomiche ASTRO Private

    Hello Mith one more quick question please. Is there away the mixamp can always be on tournament mode when i turn it on ?
  7. ASTRO Vertigo

    ASTRO Vertigo Social Media Team Staff Member

    Hey rllanomiche,

    Under the ASTRO Command Center, move the Tournament EQ to EQ slot 1. Then it'll always be the default upon startup.

    If you are unsure how to move your EQ profiles, let me know and I can guide you through it.

    - Mitch
  8. rllanomiche

    rllanomiche ASTRO Private

    thank you Mith , i would appreciate the guidance since i have confusion with the preset library and the equalizer presets
  9. ASTRO Vertigo

    ASTRO Vertigo Social Media Team Staff Member

    Hey rllanomiche,

    No worries.

    So I'm going to show you on the A50 Wireless Headset, but it's pretty much the same for your MixAmp Pro TR.

    1) Connect the MixAmp Pro TR to your computer and place it into PC mode by holding down the power button for a few seconds until the outer ring changes to solid white.

    2) Load up the ASTRO Command Center software.

    3) The default screen is the EQ presets. In the centre is the presets currently installed locally to your MixAmp Pro and the positions with the top preset being the default loaded. On the left-hand side are the presets stored through the ASTRO Command Center software.

    [​IMG]

    4) To change a currently installed preset, use your mouse to drag a preset from the left-hand side and drop it over the currently installed preset you want to replace. The EQ preset name should change to orange to show it has been modified and is now a different preset. If you really liked Tournament so much, you could install it to all four slots, however, using a little variety, you would want to place Tournament on the top slot and then adjust the others to your preference.

    The order is as follow on your EQ button.

    Slot 1 - Top Left EQ
    Slot 2 - Top Right EQ
    Slot 3 - Bottom Right EQ
    Slot 4 - Bottom Left EQ

    5) Once you have finished, use the Sync to Device button on the upper left and wait for the sync to finish. The EQ presets will now be stored locally on the MixAmp ready for use on your console.

    - Mitch
  10. rllanomiche

    rllanomiche ASTRO Private

    thank you Mitch! perfectly explained
  11. ASTRO Vertigo

    ASTRO Vertigo Social Media Team Staff Member

    Glad to hear, rllanomiche :)

    - Mitch

Share This Page